Gordak 952 User Manual Updated ⭐ Fast

When the hot air gun is switched off, the pump continues blowing air until the temperature drops below 100°C (or 50°C in newer models) to protect the heating element. Do not unplug during this phase.

| Task | Soldering Iron Temp | Hot Air Temp | Airflow | |------|--------------------|--------------|---------| | Through-hole desoldering | 350°C | 380°C | 60% | | SMD IC removal | N/A | 350–380°C | 50–70% | | Soldering small SMD parts | 320°C | 330°C | 40% | | Heat shrink tubing | N/A | 250°C | 30% | gordak 952 user manual updated

Flip the machine over. You will find a bright red screw (or sometimes two) securing the internal pump. These are for shipping only. If you run the station with these in, the vibration will be loud enough to rattle your teeth and eventually destroy the pump motor. Check Your Grounding: When the hot air gun is switched off,