How To Reset Multistar Dvr Password Jun 2026

Access restored without touching a screwdriver.

For advanced users. Open the DVR case. Locate the (often labeled J1, TX, RX, GND). Using a USB-to-TTL adapter (3.3V), connect to a PC terminal (Putty, 115200 baud). Power on the DVR. Interrupt the boot sequence by pressing Ctrl+C or Enter within 2 seconds. At the U-Boot prompt, type: how to reset multistar dvr password

Check the back or sides of the DVR for a small "Reset" button or a pinhole. With the device powered on , press and hold this button for 10–30 seconds. The DVR should reboot with default settings. Access restored without touching a screwdriver

The most definitive way to bypass a lost password is a hardware factory reset. This typically reverts the username to and leaves the password blank or sets it to admin . Locate the (often labeled J1, TX, RX, GND)

Scan the QR code that appears using your mobile surveillance app.

This is the most direct way to factory reset the device without a password. Locate the Reset Button